Used Anderson CNC Router Exxact 5 x 12 Single Table

MACHINE FEATURES:

Fixed Bridge (moving table) type machine equipped with 2 (two) 18 HP 4-pole air-cooled router spindles,
with grease lubricated ceramic bearings, dual 10-Position Automatic Tool Changing Systems, with one tool length touch probe.
The spindle motor is powered by an electronic AC inverter drive system with dynamic spindle braking.
Full Torque is achieved at 9,000 RPM & Full HP is achieved at 12,000 RPM.
Tool Changer Carousels are mounted on the spindle carriage, next to the Router Spindle, for fast & efficient tool changes.

Request Quote
Category:

Description

TECHNICAL SPECIFICATIONS:

 Table size                                            3700 mm x 1600 mm (145” x 63”)

Pop-Up Positioning Pins                 10

Vacuum Zones per Table                 1 (one)

Axis stroke                                         X axis:             4450 mm (175”)
Y axis:             1775 mm (70”)
Z axis:             350 mm (13.8”)

Maximum Rapid Rate                     X-axis:            80 meters/min (3,150”/min)
Y-axis:             80 meters/min (3,150”/min)
Z-axis:             30 meters/min (1,180”/min)

Maximum Feedrate                         X-axis:            80 meters/min (3,150”/min)
Y-axis:            80 meters/min (3,150”/min)
Z-axis:            30 meters/min (1,180”/min)

Spindle #1 & #2 – Router Spindle – (350-900mm adjustable)

Spindle type Anderson 4-Pole
Motor power 13.5Kw (S6): 11Kw (S1)
Spindle speed (RPM) 1000-22000
No. of changeable tools 10 per tool changer
Spindle nose HSK63F taper

FANUC OiMD Controller System + Windows PC Front End User Interface

This Anderson CNC Proudly uses the latest, Series 0i-MODEL D, with nano-resolution performance.
With over 700,000 systems installed, the 0/0i from FANUC is by far the world’s most popular CNC control.
The Series 0i-MODEL D achieves the highest precision possible, with nanometer resolution standard throughout the CNC system.
Fast, high resolution 16-million count-per-revolution feedback devices combine to provide a superior surface finish quality when contouring.
This minimizes the need for secondary operations, reducing delivery times & part cost.

Vacuum hold down system: 

2 (two) Becker Pumps with H-Rack
Power requirements (per pump)
Flow (per pump)         168 cfm
Total Pressure             24″ Hg

Machine footprint
Floor area                    220” x 134”
Height                          116”

Net Machine Weight                           9,000 Kg*                    (19,840 lbs.)    *not including pump(s)

Related products