Description
Through Hole Drill bit designed to eliminate tear-out on the exit cut. Shank Diameter is 10mm with flat.
V-POINT BIT – 57MM LONG
Carbide tipped V-point (thru hole) drill for use in cabinet and closet construction. The shank features a height adjustment screw and a landed flat for set screw tightening. The V-Point geometry prevents edge blowout when the bit exits material on the bottom. Special Sizes available on request. If using this bit in a toolholder / collet setup, please refer to this information for proper mounting.
Additional information
| Diameter | 1/4", 12mm, 4mm, 5.1mm, 5mm, 6mm, 7/32", 8mm |
|---|---|
| L1 | 57mm |
| L2 | 27mm |
| Rotation | LH, RH |
